Aplisens Smart Pressure Transmitters

APLISENS S.A. is one of the leading manufacturers of high quality process instrumentation. The company was founded in 1992. The main factory and headquarters are located in Warsaw. From the beginning it has concentrated on electronic pressure and differential pressure measurement technology. The basic rules have always been: high quality, high flexibility and competent support to customers.

The Aplisens Smart pressure transmitters are applicable to the measurement of the pressure, underpressure and absolute pressure of gases, vapours and liquids. The active sensing element is a piezoresistant silicon sensor separated from the medium by a diaphragm and by specially selected type of manometric liquid. The casing is made of aluminium alloy cast or 316 stainless steel , the degree of protection is IP66/IP67. The design of the casing enables the use of a local display, rotation of the display, rotation of the casing by 0-340° relative to the sensor, and choice of cable direction.

The transmitter can be installed directly on the installation. A universal mounting bracket is provided to transmitter fitting on 2 pipe. When the pressure of steam or other hot media is measured, a siphon or impulse line should be used.”
The needle valve placed upstream the transmitter simplifies installation process and enables the zero point adjustment or the transmitter replacement. When the special process connections are required for the measurement of levels and pressures (e.g. at food and chemical industries), the transmitter is provided with an Aplisens diaphragm seal. The transmitter’s electrical connections should be performed with twisted cable. The place for the communicator should be assigned before the communicator installation.

For more information or to arrange a consultation, contact us today https://www.streatcontrol.com/

Ametek Process Instruments 3050 Moisture Analyzer Series

The 3050 series of moisture analyzers utilizes AMETEK’s proven, accurate quartz crystal microbalance (QCM) technology. Built-in verification provides operators with increased measurement confidence.

The industry standard for trace moisture applications, QCM technology delivers the most accurate measurements available, and responds quickly to increasing and decreasing moisture levels. The 3050 optimizes this technology for a range of applications.

Dimetix Laser distance measuring devices

Dimetix has been developing and manufacturing laser distance sensors for more than 20 years. As a company that is proud of being Swiss, we aim for the highest possible quality, resulting in unique, accurate long-distance sensors – the solution that provides applications for the most accurate demands for measurement.

McMenon FPD320 flow nozzles

The flow nozzle is used for high velocity flow measurement where erosion or cavitation would wear or damage an orifice plate. It does not rely on a sharp edge for accuracy, therefore offering excellent long-term accuracy and it is often used for flow testing on steam-raising plant.