ECD TC80 Total Chlorine Analyser

The TC80 Total Chlorine Analyser from Electro-Chemical Devices (ECD) eliminates consumables, simplifies installation and reduces maintenance with a self-cleaning design to lower the total cost of ownership. This easy-to-use analyser is a panel-mounted unit that is ready-to-go right out of the box.

The ECD TC80 Total Chlorine Analyser is a panel mounted, ready to use Total Chlorine Analyser. It is designed to monitor total chlorine in drinking water, industrial cooling and rinse water, wastewater or other fresh water samples containing chlorine in the range of 0-20 ppm. The Total Chlorine Sensor (TCS) is a three electrode amperometric sensor that measures all chlorine species in the water, combined chlorine and free chlorine in a range of 0.05 – 20 ppm Cl2 (High Range) or 0.005 to 2.000 ppm (Low Range). The TC80 Total Chlorine Analyser features a plug and play design that incorporates a flow control device, a pH sensor, a chlorine sensor and the T80 transmitter are conveniently mounted on a PVC panel. Connect the sample and drain lines, connect the power and outputs and it is ready to use. The TC80 Total Chlorine Analyser is calibrated at the factory before shipment, additional Calibrations are accomplished by DPD comparison.

Key Features include:

1. No Reagents Required: the TC80 Total Chlorine Analyzer sensor technology and automatic pH compensation is a reagentless design and keeps the cost of ownership low without having expensive reagents.

2. Compliant with EPA Method 334.0

3. Automatic Flow Control and Large Flow Tubes and Cells: greatly reduces clogs and blockages of the analyser which is a common problem in other total chlorine analysers and allows for easy cleaning.

4. Panel Mounted System Plumb and Play Design: The Total Chlorine Analyser comes complete and is easy to install and ready to use.

5. TC80 Total Chlorine Analyser Capability: Dual Measurements (2) 4 to 20 mA output, MODBUS and/or HART communication, (3) Alarm Relays, 24 VDC or 110/220 AC Power.

6. Auto Cleaning Option: The TC80 Total Chlorine Analyser can be ordered with an auto cleaning option to keep the chlorine sensor clean from contaminants for an extended period of time.

Ametek Process Instruments 3050 Moisture Analyzer Series

The 3050 series of moisture analyzers utilizes AMETEK’s proven, accurate quartz crystal microbalance (QCM) technology. Built-in verification provides operators with increased measurement confidence.

The industry standard for trace moisture applications, QCM technology delivers the most accurate measurements available, and responds quickly to increasing and decreasing moisture levels. The 3050 optimizes this technology for a range of applications.

Dimetix Laser distance measuring devices

Dimetix has been developing and manufacturing laser distance sensors for more than 20 years. As a company that is proud of being Swiss, we aim for the highest possible quality, resulting in unique, accurate long-distance sensors – the solution that provides applications for the most accurate demands for measurement.

McMenon FPD320 flow nozzles

The flow nozzle is used for high velocity flow measurement where erosion or cavitation would wear or damage an orifice plate. It does not rely on a sharp edge for accuracy, therefore offering excellent long-term accuracy and it is often used for flow testing on steam-raising plant.