McMenon FPD320 flow nozzles

The flow nozzle is used for high velocity flow measurement where erosion or cavitation would wear or damage an orifice plate. It does not rely on a sharp edge for accuracy, therefore offering excellent long-term accuracy and it is often used for flow testing on steam-raising plant. The discharge coefficient of a flow nozzle is such that a nozzle can measure approximately 55 % higher flow rates than an orifice plate with a similar beta ratio and design differential pressure. In the case of steam measurement, the pressure loss may not be significant as the effect is to beneficially heat the steam slightly. .

Long radius nozzle
— the inlet profile is a quarter-ellipse with a cylindrical throat. The ellipse can have one of two aspect ratios (low or high), depending on the beta ratio. Tappings are typically 1 pipe diameter (D) upstream and 1/2 D downstream of the inlet, but the downstream tapping position on some low ratio versions can differ.

Throat tap nozzle
— the inlet profile is a quarter-ellipse with a cylindrical throat. The upstream tapping is in the pipework, 1 D from the inlet; the downstream tapping is within the cylindrical throat and the connection to it is on the circumference of the nozzle ring. The design is usually conforms to ASME PTC-6, with the nozzle mounted within a run of pipework, the upstream section of which includes a flow straightening element.

McMenon flow nozzles are available in designs for clamping between flanges (within the bolt circle), as weld-in units or mounted within pipe runs.

The features and benefits of McMenon FPD320 flow nozzles
include:

— Mature, established technology
— Available in sizes from DN50 to DN600 (2 to 24 in.)
— Maintains long-term performance
— No moving parts – virtually maintenance-free
— Performance of device can be calculated from measurement of key dimensions alone
— Available in a wide range of materials to suit the process fluid and the working conditions

Precision in Every Measurement: Why Choose Us

At Streat Control, we understand that precision is not just a requirement—it’s a standard. With our extensive experience in providing high-quality measuring instruments and calibration services, we cater to the unique needs of industries such as mining, food and beverage, and pulp and paper. Our commitment to accuracy and reliability ensures that your processes run smoothly, efficiently, and safely.

For more information or to arrange a consultation, contact us today https://www.streatcontrol.com/

Ametek Process Instruments 3050 Moisture Analyzer Series

The 3050 series of moisture analyzers utilizes AMETEK’s proven, accurate quartz crystal microbalance (QCM) technology. Built-in verification provides operators with increased measurement confidence.

The industry standard for trace moisture applications, QCM technology delivers the most accurate measurements available, and responds quickly to increasing and decreasing moisture levels. The 3050 optimizes this technology for a range of applications.

Dimetix Laser distance measuring devices

Dimetix has been developing and manufacturing laser distance sensors for more than 20 years. As a company that is proud of being Swiss, we aim for the highest possible quality, resulting in unique, accurate long-distance sensors – the solution that provides applications for the most accurate demands for measurement.

McMenon FPD320 flow nozzles

The flow nozzle is used for high velocity flow measurement where erosion or cavitation would wear or damage an orifice plate. It does not rely on a sharp edge for accuracy, therefore offering excellent long-term accuracy and it is often used for flow testing on steam-raising plant.